Payment & Shipping Terms:
|Name:||Inductance Proximity Sensor||Feature:||Easy Installation|
|Output Method:||NPN/PNP||Induction Method:||Normally Open|
industrial proximity sensor,
inductive prox sensor
Versatile Industrial Proximity Switch , Inductance Proximity Sensor Easy Installation
· Lag distance:Less than 10% of the detection distance
· Supply voltage: DC 12~24 (6~36V) pulse (p-p) below 10%
· Detecting objects:Magnetic metal
· Output form NPN/PNP two lines
· Output state normally open (NO)
IP67 protection structure (IEC)
Reverse power protection, short circuit protection, can be directly connected to the PLC
Economical and simple operation
Long life and high reliability, strong environmental resistance
Red LED reality can detect sensor working status
|Lag distance||Less than 10% of the detection distance|
|Detecting objects||Magnetic metal (detection distance is reduced when non-magnetic metal)|
|voltage||DC : DC 12~24 (6~36V) pulse (p-p) below 10%|
|AC : AC 110~220V (36~250V) 50/60Hz|
|Current consumption||N.P : ≤13mA|
|D : ≤0.8mA|
|A : ≤1.7mA|
|Control output||N.P : ≤300mA|
|D : ≤200mA|
|A : ≤400mA|
|Loop protection||N.P.D : reverse connection protection, surge absorption, load short circuit protection|
|A : surge absorption|
|Ambient temperature||-30~+65°C (no icing, no condensation)|
|Insulation resistance||50MΩ or more (DC500 megohmmeter) (between charging part and housing)|
|Withstand voltage||AC 1000V 50/60HZ 1min (between charging part and Housing)|
|Temperature effect||-30~+65°C: detection distance error ±15% at +23°C|
|-25~+60°C: detection distance error ±10% at +23°C|
|Voltage effect||6-36V (90-250V) : ±15% of detection distance error|
|10-30V (220V) : ±10% of detection distance error|
|Protection level||IP67 (IEC)|
|Detection surface: ABS|
Note:Please read the "Precautions" of the product manual before use.
About maintenance and overhaul
In order to keep the proximity sensor to work stably for longtime, the following regular examinations should be performed just like general control
1. Check the installation position of detected object and proximity sensor if any deviation,loosening or deformation exists.
2. Check the attached wires and connecting parts if any loosening,bad contact or wire breaking off exists.
3. Check if there is any metallic powder accumulation or not.
4. Check if the temperature condition and surrounding environment condition are normal or not.
5. Check if the detection distance is normal or not.
Zhongde is a scientific and technological multi-element enterprise integrating scientific research, production, industry and trade. Its main production and operation: proximity switch, photoelectric switch, photoelectric power supply, sensor, solid state relay, amorphous alloy transformer, large special transformer, small relay, double Power automatic switch, dry variable temperature controller, dry variable fan, electric welder, arc welder and other products, the series of products have obtained CE product certification.
Contact Person: Carrie