Payment & Shipping Terms:
|Name:||Safety Proximity Switch||Feature:||Reliable|
|Output Method:||NPN/PNP||Induction Method:||Normally Open|
safety proximity sensor,
safety inductive sensor
Reliable Safety Proximity Switch NPN / PNP With Multiple Protection Function
All our Safety Proximity Switches have IP67 protection structure.Whichever Proximity Switch you decide to choose: what you get is a safe, economical and complete one-stop solution. And the best thing about it is: Our solutions are individually expandable, so that you benefit from high flexibility!
|Lag distance||Less than 10% of the detection distance|
|Detecting objects||Magnetic metal (detection distance is reduced when non-magnetic metal)|
|voltage||DC : DC 12~24 (6~36V) pulse (p-p) below 10%|
|AC : AC 110~220V (36~250V) 50/60Hz|
|Current consumption||N.P : ≤13mA|
|D : ≤0.8mA|
|A : ≤1.7mA|
|Control output||N.P : ≤300mA|
|D : ≤200mA|
|A : ≤400mA|
|Loop protection||N.P.D : reverse connection protection, surge absorption, load short circuit protection|
|A : surge absorption|
|Ambient temperature||-30~+65°C (no icing, no condensation)|
|Insulation resistance||50MΩ or more (DC500 megohmmeter) (between charging part and housing)|
|Withstand voltage||AC 1000V 50/60HZ 1min (between charging part and Housing)|
|Temperature effect||-30~+65°C: detection distance error ±15% at +23°C|
|-25~+60°C: detection distance error ±10% at +23°C|
|Voltage effect||6-36V (90-250V) : ±15% of detection distance error|
|10-30V (220V) : ±10% of detection distance error|
|Protection level||IP67 (IEC)|
|Detection surface: ABS|
Note:Please read the "Precautions" of the product manual before use.
About maintenance and overhaul
In order to keep the proximity sensor to work stably for longtime, the following regular examinations should be performed just like general control
1. Check the installation position of detected object and proximity sensor if any deviation,loosening or deformation exists.
2. Check the attached wires and connecting parts if any loosening,bad contact or wire breaking off exists.
3. Check if there is any metallic powder accumulation or not.
4. Check if the temperature condition and surrounding environment condition are normal or not.
Contact Person: Carrie